Secomea TrustGate 61 - User Manual

Guide for Resetting a TrustGate or
SiteManager Appliance
This guide will show you how to reset a Secomea Appliance to factory de-
fault.
Please visit our support website for mode information.
Version 4, January 2015

Summary

Introduction to Appliance Resetting

Serial Connection for Resetting

Explains the need to connect via serial interface for appliance resetting.

Cable and Application Details

TrustGate 164, 264, 560 R Console Cable

Specifies the DB9-RJ45 console cable included for specific TrustGate models.

Reset Procedure for TrustGates

All TrustGates Reset Steps

Detailed steps for resetting TrustGates, including terminal commands and confirmation.

Reset Procedure for SiteManager 3129

SiteManager 3129 Reset Steps

Instructions for resetting SiteManager 3129, involving serial cable and terminal commands.

Reset Procedure for Other SiteManagers

Other SiteManagers Reset Steps

Procedure for resetting other SiteManagers, with a note on activating console menu.

Serial Parameters Overview

19200 Baud Rate Serial Settings

Specifies serial settings: 19200, 8 bits, 1 Stop, no parity for SIG5, SIG5e, TrustGate, SiteManager.

Serial Parameters: 38400 Baud

38400 Baud Rate Serial Settings

Serial settings for TrustGate60/61: 38400 bps, 8 data bits, 1 stop bit, no parity.

Serial Parameters: 115200 Baud (TrustGate 232 R;363 R;460 R)

115200 Baud Rate Serial Settings (TrustGate 232 R;363 R;460 R)

Serial settings for TrustGate 232R/363R/460R: 115200 bps, 8 data bits, 1 stop bit, no parity.

Serial Parameters: 115200 Baud (TrustGate 164;264;560 R)

115200 Baud Rate Serial Settings (TrustGate 164;264;560 R)

Serial settings for TrustGate 164/264/560R: 115200 bps, 8 data bits, 1 stop bit, no parity.

Document Notices and Disclaimers

Secomea TrustGate 61 Specifications

General

Brand	Secomea
Model	TrustGate 61
Category	Network Accessory
Language	English