Operation Instruction
Code Masking (Prevent others from viewing your code)：Add
any random digit before or after the correct 6-digit code (at
most 3 digits). The lock will open only if the 6 consecutive digits
of the valid code are entered. Press “√” button to confirm when
the code is less than 9 digits.
1) First-Time Use：Enter the default admin code 123456→ Press
“√” button→Turn the handle to open the door.
2) Add First Owner: Press button→Enter 123456→Press
“√” button→Push up SECURAM logo slide cover→Enroll first
finger 3 times →Enroll second finger 3 times→Enter code twice.
Note: 1. Code can't be 123456.
2. Code can't start with 00. If code is 008888, the voice
prompt will say,“invalid code”
3. Code has to be set for first owner. Otherwise, adding
first owner fails.
3）Unlocking Options:
●Unlock with finger vein：Push up SECURAM logo slide cover,
and place finger on reader following the voice prompt.
88 123456 9
Correct code
Masking code
.
To Next Page
Loading...
