Unencrypted Authentication (PAP): This is plain text password authentication.
When using this type of authentication, the client passwords are transmitted un-
encrypted.
Select the Required Encryption Level, access is denied to remote users attempting to
connect not using this encryption level. Using Strong Encryption (MPPE 128 Bit) is
recommended.
Select the Authentication Database. This allows you to indicate where the list of valid
clients can be found. You can select from the following options:
Local: Use the local database defined on the Local Users tab of the Users page.
You must enable the Dial-in Access option for the individual users that are allowed
dial-in access.
RADIUS: Use an external RADIUS server as defined on the RADIUS tab of the
Users page.
TACACS+: Use an external TACACS+ server as defined on the TACACS+ tab of the
Users page.
Note
See the Users section of the chapter entitled System for details on adding user accounts
for dial-in access, and configuring the SnapGear unit to enable authentication against a
RADIUS or TACACS+ server.
Click Update.
58
Network Setup
To Next Page
Loading...
