13
Node Information Frame - NIF
Pressing and holding the network button for 1 second
will trigger the SSR303 to issue a Node Information
Frame and enter learn mode for 1s. This is useful to
associate/disassociate the SSR303 with a control
group or just to determine the device and command
classes supported. This can be done at any time but will
not provide any indication to the operator.
Z-wave Repeater
This SSR303 will act as a repeater once included into
the Z-wave network, providing an alternative
communication route for units which otherwise would
not be within communication distance of each other.
To Next Page
Loading...
General