7
Electrical Connections
All necessary electrical connections should now be
made. Flush wiring can enter from the rear through the
aperture in the backplate.
The mains supply terminals are intended to be
connected to the supply by means of fixed wiring.
The receiver is mains powered and requires a 3 Amp
fused spur.
The recommended cable size is 1.Omm2.
The receiver is double insulated and does not require
an earth connection, an earth connection block is
provided on the backplate for terminating any cable
earth conductors. Earth continuity must be maintained
and all bare earth conductors must be sleeved. Ensure
that no conductors are left protruding outside the central
space enclosed by the backplate.
To Next Page
Loading...
General