SECURUS MONITORING SOLUTIONS |
A Satellite Tracking of People LLC Company
1. Locate the strap, strap clips(x2), top cap(x2) and
cutting tool.
2. Make note of BLUtag’s seri
al number.
3. Using the cutter, cut off one end of the strap.
a) Make su
re holes on the strap are secured
o
n the posts on the template side of the
cutting tool prior to cutting.
b) Cut on a solid flat surface
4. Lay clip 1 on the table (solid surface) and plac
e
strap in clip flush to border.
5. Insert top cap, ensure cylinder of top cap is seated
secur
ely into the recess on the strap clip.
6. Place clip 2 on top of the strap and press together.
En
sure clips are flush and no strap is protruding
from ends of clips.
ATTACH BLUTAG TO ENROLLEE
1
2
6
33
4
X
2
3
5
To Next Page
Loading...
