Presentation
This standalone WiFi camera
is designed with a waterproof
casing allowing you to install
it both indoors and outdoors.
Before installing the camera,
make sure that your WiFi signal is
accessible in the desired location.
If the camera is installed outdoors,
it is advisable to place it under a
shelter in order to improve the
quality of the image (raindrops
can sometimes impair visibility).
Powered by Lithium batteries, the
camera can be recharged using
the USB cable provided. The solar
panel included in the kit keeps the
batteries charged for continuous
operation and easy installation (no
power supply required).
Objectif
Microphone
Projecteur LED
Voyant LED (charge batterie : rouge)
Voyants LED (état : rouge/bleu)
Détecteur de mouvement (PIR)
Haut parleur
Bouton RESET
Bouton ON/OFF
(marche / arrêt)
Port (Micro USB) de chargement
des batteries (5 V DC)
Port pour carte Micro SD
EN
Lens
Microphone
LED projector
LED indicator (battery charge: red)
LED indicators (status: red/blue)
Motion detector (PIR)
Battery charging port (Micro USB)
charging port (5 V DC)
Micro SD card slot
Loudspeaker
RESET button
ON/OFF button
(on/o) button
To Next Page
Loading...