Need help?Do you have a question about the SEDEA iFS510 and is the answer not in the manual?
Describes the standalone WiFi camera's waterproof casing, installation features, and connectivity requirements.
Lists all components included in the camera and solar panel kit for installation.
Instructions for fully charging the camera's batteries before initial use.
Guide for inserting a Micro SD card for recording, if desired.
Steps to download and install the required mobile application for camera management.
Procedure to power on the camera using the ON/OFF button and check its status.
Detailed steps to connect the camera to your WiFi network and SEDEA Home account.
Guidance on placing and checking the camera's position and WiFi signal strength.
Recommendations for optimal solar panel orientation and placement for charging.
Important factors affecting solar panel charging and battery life.
Detailed technical data for the camera unit, including resolution, night vision, and waterproofing.
Information on the pre-installed rechargeable batteries, including capacity and voltage.
Technical details of the solar panel, including output, cable length, and dimensions.
Guidelines for proper disposal of the product and batteries according to EU directives.
Information on product warranty and the EU Declaration of Conformity.
Essential safety instructions and warnings for operating and handling the device.
General| Night Vision | Yes |
|---|---|
| Night Vision Range | 30m |
| Weather Resistance | Yes |
| Motion Detection | Yes |
| Audio | Built-in microphone |
| IR Distance | 30m |
| Power Supply | 12V DC |
| Storage | MicroSD card (up to 128GB) |
To Next Page