EasyManua.ls Logo

SEDEA iFS510 - Technical specifications; Camera specifications; Battery specifications; Solar panel specifications

SEDEA iFS510
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- Activation of the LED oodlight: Using the LED oodlight on motion detection,
manual activation or programmed activation will not alter the charging of the
solar panel as long as the use is «normal». Indeed, in the case of abusive use of
the LED oodlight, the solar panel may not be able to maintain the charge of
the device.
Technical specications
Camera :
Resolution: 1920 x 1080 pixels (1080p)
Compression: H.264
Illumination: 2 LED projectors (white)
Night vision: up to 10 meters
Viewing angle: 95
Supports micro SD card: up to 128 GB (Max) (not included)
Batteries: 2x Li-ion 18650 3.6V 2600mAh
Recharge via solar panel 5.0V (DC) 3.0W or power supply 5.0V (DC) 1.0A
5.0W max
Waterproong: IP54
WiFi standard: 802.11 b/g/n (HT20)
WiFi frequency band: 2412 ~ 2472 MHz
WiFi standard: 802.11 b/g/n (HT40)
WiFi frequency band: 2422 ~ 2462 MHz
Maximum transmitted power: 5.67 mW e.i.r.p
Dimensions: 105 x 70 x 60mm
Pre-installed batteries
- Brand: Sinowatt Dongguan Limited
- Type: Litihum-Ion Rechargeable Cylindrical Cell
- Model: SW18650-26HPA
- Voltage: 3.6V
- Capacity: 2600 mAh / 9.36Wh
Solar panel
Output: 5.0 V DC 0.6A / 3.0W max.
Cable length: 2.9 meters
Dimensions: 175 x 122 x 14mm
Waterproong: IP65