Application
• Works for LoRaWAN sensor nodes and any wireless communication
application
• IoT device testing and development
Getting Started
Preparations
Here is a demo showing you how to connect TTN (The Things Network)
and Seeeduino XIAO module via Grove - LoRa-E5 module. These
modules are able to collect temperature and humidity parameters from
the environment and send them back to TTN. The flashing LED lights on
the Seeeduino Xiao indicate the status of the temperature and humidity
sensor as connecting to TTN cloud.
Attention
Please ensure the consistent of the frequency band among the end nodes, gateway,
and TTN configuration you are using by following this instruction. The frequency plan
this demo applied is for EU868.
Hardware Required
To Next Page
Loading...
