Seeed Grove - Page 15

7/23/22, 9:41 PM
Grove - Chainable RGB LED - Seeed Wiki
https://wiki.seeedstudio.com/Grove-Chainable_RGB_LED/
15/29
232 grovepi.chainableRgbLed_test(pin, numleds, t
233 time.sleep(.5)
234
235
236 print "Test 4b) Set using modulo - every 2"
237
238 # change color to red
239 grovepi.storeColor(255,0,0)
240 time.sleep(.5)
241
242 # set every 2nd led to red
243 grovepi.chainableRgbLed_modulo(pin, 0, 2)
244 time.sleep(.5)
245
246 # pause so you can see what happened
247 time.sleep(2)
248
249
250 print "Test 4c) Set using modulo - every 2,
251
252 # change color to green
253 grovepi.storeColor(0,255,0)
254 time.sleep(.5)
255
256 # set every 2nd led to green, offset 1
257 grovepi.chainableRgbLed_modulo(pin, 1, 2)
258 time.sleep(.5)
259
260 # pause so you can see what happened
261 time.sleep(2)
262
263 # reset (all off)
264 grovepi.chainableRgbLed_test(pin, numleds, t
265 time.sleep(.5)
266
267
268 print "Test 4d) Set using modulo - every 3,
269
270 # change color to red
271 grovepi.storeColor(255,0,0)
272 time.sleep(.5)