Seeed Grove - Page 16

7/23/22, 9:41 PM
Grove - Chainable RGB LED - Seeed Wiki
https://wiki.seeedstudio.com/Grove-Chainable_RGB_LED/
16/29
273
274 # set every 3nd led to red
275 grovepi.chainableRgbLed_modulo(pin, 0, 3)
276 time.sleep(.5)
277
278 # change color to green
279 grovepi.storeColor(0,255,0)
280 time.sleep(.5)
281
282 # set every 3nd led to green, offset 1
283 grovepi.chainableRgbLed_modulo(pin, 1, 3)
284 time.sleep(.5)
285
286 # change color to blue
287 grovepi.storeColor(0,0,255)
288 time.sleep(.5)
289
290 # set every 3nd led to blue, offset 2
291 grovepi.chainableRgbLed_modulo(pin, 2, 3)
292 time.sleep(.5)
293
294 # pause so you can see what happened
295 time.sleep(2)
296
297 # reset (all off)
298 grovepi.chainableRgbLed_test(pin, numleds, t
299 time.sleep(.5)
300
301
302 print "Test 4e) Set using modulo - every 3,
303
304 # change color to yellow
305 grovepi.storeColor(255,255,0)
306 time.sleep(.5)
307
308 # set every 4nd led to yellow
309 grovepi.chainableRgbLed_modulo(pin, 1, 3)
310 time.sleep(.5)
311
312 # pause so you can see what happened
313 time.sleep(2)