What to do if my Seeley Breezair EXS cooler is not cooling properly?
If your Seeley Accessories cooler isn't cooling adequately, several factors could be at play. First, ensure the water supply is on and that water flows correctly to the pads. Also, make sure there are sufficient exhaust openings for the conditioned air. Keep in mind that on days with high ambient humidity, the cooler's ability to reduce the temperature will be diminished.
How to get rid of the bad smell from my new Seeley Breezair EXS Accessories?
If you notice an unpleasant odor from your new Seeley Accessories, it may be due to the new pads. You can use the ‘Pad Flush’ function in the SETTINGS menu of your Controller to flush the pads. Also, fill the tank, run the pump briefly to wash the pads, then drain and refill the tank, repeating this process several times if the odor persists. The smell should dissipate after a few hours of operation.
Crucial information regarding installation, maintenance, and warranty compliance for safe operation.
Explains how to use the MagIQtouch controller for cooler operations.
Explains how to access and interpret service mode diagnostics.
Outlines required maintenance schedules and checks for optimal cooler performance.
Guidelines for safe and adequate access for service.
Specific tasks for pre-season and end-of-season maintenance.
Provides a detailed checklist for component checks, cleaning, and replacement over time.
General| Brand | Seeley |
|---|---|
| Model | Breezair EXS |
| Category | Accessories |
| Language | English |
To Next Page
