Seeley MagIQtouch - Power Outage Procedures; Troubleshooting MagIQtouch Controller Issues

MAGIQTOUCH CONTROLLER OWNER’S MANUAL
|
33
Symptom Cause Action
The MagIQtouch
Controller has
no display.
The cable from
cooler may not be
tted correctly.
Ret cable.
Cable damaged or
broken.
Replace cable.
The MagIQtouch
Controller shows
my cooler/heater is
on, but I can’t hear
the fan working.
The set temperature
has been achieved
and the cooler/heater
is in standby.
None required.
The Controller is in
PROGRAM mode and
the current time period
species the cooler/
heater is “OFF”.
Review the schedule
via the EDIT button on
the PROGRAM home
screen.
POWER OUTAGES
TROUBLE SHOOTING
Your MagIQtouch Controller may prompt you to call a service agent
to resolve a service issue. If your Controller has only recently been
installed, we recommend you call your local Dealer for support rst.
Otherwise, call the Service number on the back of this manual.
After a power outage there will be a prompt to adjust the time and
date.
If AUTO RESTART option is ON in general settings, the cooler or
heater will automatically restart in the last running state before the
outage.