Operating Manual
MG1/dw-00 page 10 / 20
en MG1/dw-00 / June 13, 2006 Rev. 10.1
Versions
$
MG12/…
$
MG13/…
$
MG1S20/…
$
RMG12/…
$
MG1 MULTIPLE M.S.
The mechanical seal type MG1 can also be used as multiple mechanical seal (also
in combination with seal types of other series) in tandem arrangement with quench
(API, plan 52) or as dual mechanical seal with barrier fluid (API, plan 53).
Consultation with the BURGMANN company is recommended.
ATTENTION! PTFE o-rings or double-PTFE-wrapped o-rings may not be used at seat
versions without torsion lock.
This operating manual applies also to the mentioned seal versions with slight
modifications and/or to combinations with seats not stated in this manual.
Seat Versions
To Next Page
