Operating Manual
MG1/dw-00 page 8 / 20
en MG1/dw-00 / June 13, 2006 Rev. 10.1
INFORMATION ABOUT THE PRODUCT
All technical information given is based on the results of extensive testing and on
BURGMANN's long term practical experience. However, in view of the great diversity
of possible applications the technical data can only be taken as being of approximate
nature. We can only guarantee the safe and efficient functioning in individual cases if
we have been comprehensively informed of the operating conditions to which they
will be subject, and if this has been confirmed in a separate agreement.
Manufacturer and country of origin
Burgmann Industries GmbH & Co. KG
Äußere Sauerlacher Str. 6-10
D - 82515 Wolfratshausen
Germany
Declaration by the manufacturer
within the meaning of the EC-directive "MACHINERY" 98/37/EG
A mechanical seal does not function independently. It is intended to be
incorporated into or assembled with machinery.
Type designation
BURGMANN Mechanical Seal MG1/dw-00
Designated use
This mechanical seal is exclusively designed for the use in the specified application.
A different utilisation or a utilisation going beyond the specification is considered
contrary to its designated use and excludes a liability by the manufacturer.
Operation under conditions lying outside those limits stated in paragraph
"Operating limits" is considered contrary to its designated use.
Should the seal be operated under different conditions or at a different
application BURGMANN has to be asked for recognition as safe in advance.
" Changes to operating conditions have to be documented.
To Next Page
