SEFA
®
France
Page N°5
IV. USE OF THE MACHINE
The PR245S press was designed to apply all quality transfers in medium and great series.
This equipment was tested in our workshops to obtain a one-year guarantee against any manufacturing vice.
The adjustments (pneumatic, electric and mechanic) carried out by our technicians in the workshop as well
as the securities implemented on the machine should not be modified in any case. Otherwise, the S.E.F.A
®
Company will deny all responsibilty on possible problems linked to the machine.
Before starting any pressing operation, it is recommended to carefully read the safety instructions as well
as the directions for use.
1. SAFETY
THIS EQUIPMENT IS DESIGNED FOR SINGLE USE ONLY
USE BY QUALIFIED STAFF ONLY
Symboles internationaux :
You will find most of these symbols on the SEFA machines.
Some important points for the safety of the staff:
Avoid touching the hot parts of the equipment while in use.
Do not put your hands between the plates once the equipment is activated.
During handling action, ensure that the operator do not risk anything in terms of burn,
electrocution or other.
Carry out a daily inspection of the machine before starting the production.
In the zone close to the machine, make sure that nobody is around before you start.
If the machine does not work properly, immediately cut the energy supply and look for the
cause making use of the book’s chapter ”Service”.
O
I
OFF
ON
DANGER, WARNING
HOT SURFACE
ELECTROCUTION RISK
To Next Page
Loading...