Seg HighTECH MRG3 - Adjustment of the Clock

SEG Electronics GmbH Manual MRG3
52 DOK-TD-MRG3, Rev. D
5.8.5 Adjustment of the clock
When adjusting the date and time, LED  lights up. The adjustment method is as follows:
Date : year y=00
month m=00
day d=00
Time : hour h=00
minute m=00
second s=00
The clock starts with the set date and time as soon as the supply voltage is switched on. The time
is safe-guarded against short-term voltage failures for at least 6 minutes.
Note:
The window for parameter setting of the clock is located behind the measuring value display. The
parameter window can be accessed via the <SELECT/RESET> key.