To Next Page

To Previous Page

INTRODUCTION

iii

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualied professionals. This Manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialised knowledge.

The Site Maintenance Personnel or other qualied professionals mentioned in this Manual are dened as follows:

Site Maintenance Personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the

supervision of the owner/operator of this product to maintain machines within amusement facilities or similar

premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/

expendable parts.

Activities to be carried out by Site Maintenance Personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualied professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or

maintenance of amusement equipment. The individual should have either graduated from technical school or hold

similar qualications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualied professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Denition of 'Site Maintenence Personnel’ or Other Qualied IndividualsDenition of 'Site Maintenence Personnel’ or Other Qualied Individuals

Electrical & Mechanical SpecicationsElectrical & Mechanical Specications

Procedures not described in this Manual or marked as ‘to be carried out by Site

Maintenance Personnel or other qualied professionals’ should not be carried

out by personnel without the necessary skill or technological experience. Work

carried out by unqualied persons may cause serious accidents, including

electrocution.

Standard Cabinet

Machine Dimensions: 1.07m (42.1in) [Width] x 1.83m (72.1in) [Depth]

Machine Height: 2.41m (94.8in) (Installed)

Machine Weight: 358kg Approx (Installed)

Power, maximum current: -350w-

Rating:

115/230VAC @ 50/60Hz

Fuse Rating: 3.15A

SPECIFICATIONS

Sega DRONE RACING GENESIS User Manual

Questions and Answers: