What to do if GD-ROM is not found on my Sega Arcade Game Machines?
If your Sega Arcade Game Machine's GD-ROM is not found, correctly insert the GD-ROM disc. Ensure it is a Chihiro GD-ROM disc and inspect it for any scratches, dust, or dirt.
Why is the color on my Sega Arcade Game Machines PTV screen incorrect?
If your Sega Arcade Game Machine displays an incorrect color on the PTV screen, the image adjustment might be inappropriate. You should adjust it accordingly.
How to fix a lamp that does not light up on Sega Ghost Squad Deluxe?
If your Sega Arcade Game Machine's lamp isn't lighting up, the lamp may have burnt out. Replace the lamp to resolve this issue.
What to do if the FL does not light up on Sega Ghost Squad Deluxe Arcade Game Machines?
If your Sega Arcade Game Machine's FL does not light up, it is likely that the fluorescent light has burnt out. You should replace it.
What to do if 'Gateway is not found' on Sega Ghost Squad Deluxe Arcade Game Machines?
If your Sega Arcade Game Machine shows 'Gateway is not found', check the power of the Server (Hub).
Why gateway cannot be found on Sega Ghost Squad Deluxe Arcade Game Machines?
If you're getting a 'Gateway cannot be found' error on your Sega Arcade Game Machine, it means there's no connection to the Server (Hub) at startup. Check the connection between the Server (Hub) and the Chihiro.
What does communication error mean between main board and media board on Sega Ghost Squad Deluxe?
If your Sega Arcade Game Machine displays a 'Communication error occurred between main board and media board' message, it indicates that there is no response from the DIMM BOARD to MAIN BOARD. Ensure that the DIMM BOARD and the GD INTERFACE BOARD are properly connected.
Why DIMM memory is not enough on Sega Ghost Squad Deluxe Arcade Game Machines?
If your Sega Arcade Game Machine says 'DIMM memory is not enough', it could be due to: 1. Insufficient DIMM MEMORY on the DIMM BOARD: Provide a suitable amount of DIMM MEMORY for the software. 2. DIMM MEMORY is not connected securely: Verify that the DIMM MEMORY is connected securely to the DIMM BOARD.
Why JVS I/O board does not fulfil the game spec on Sega Ghost Squad Deluxe Arcade Game Machines?
If your Sega Arcade Game Machine's JVS I/O board does not fulfill the game spec, it means that the correct I/O BOARD is not connected. Use an I/O BOARD that provides the proper input/output for the game.
What to do if Sega Ghost Squad Deluxe Arcade Game Machines do not activate with Main SW ON?
If your Sega Arcade Game Machine is not activating when the Main SW is ON, it could be due to a few reasons: * Power is not supplied: Securely insert the power plug into the plug socket. * Power supply/voltage is not correct: Make sure that power supply/voltage is correct. * The Circuit Protector functioned due to a momentary overload: After eliminating the cause of overload, reinstate the AC Unit's Circuit Protector.
Checks to ensure safe product transportation before initial power-up.
Detailed steps for attaching the billboard pop and related parts.
Steps for assembling the main cabinet, including moving the PTV and attaching the front panel.
Explanation of the game's controls and button functions.
Details on game mechanics like Life, Continue, GS Meter, and Reload.
Setting the credit rate for each coin inserted into the machine.
Setting the number of credits required to start or continue a game.
Adjusting the gun's calibration targets (TOP, LEFT, CENTRE, etc.).
Testing the functionality of reading from and writing to IC Cards.
Step-by-step guide for replacing microswitches in the gun controller.
Steps for replacing the solenoid in the gun controller.
Instructions for cleaning the exterior surfaces of the cabinet.
Troubleshooting common issues not related to the main game board.
Information and procedures for replacing fuses in the machine.
Explains common error messages and their resolution steps.
General| Brand | Sega |
|---|---|
| Model | Ghost Squad Deluxe |
| Category | Arcade Game Machines |
| Language | English |
To Next Page