Sega WaveRunner GP - User Manual

Questions and Answers

J
Joan CollinsAug 20, 2025
What to do if my Sega Arcade Game Machine is not activated when the main switch is ON?
- C
  Christopher HowellAug 20, 2025
  If your Sega Arcade Game Machine doesn't activate when you turn on the main switch, here are a few things to check: * Ensure the machine is properly plugged into the outlet. * Verify you're using the correct power source and voltage. * If the circuit protector has tripped due to overcurrent, address the cause of the overload and then reset the circuit protector of the AC unit. * If the fuse on the connect board blew because of overcurrent, fix the overload issue and replace the fuse with one of the specified rating (514-5036-7000, FUSE 6.4 ø X 30 7000mA 125V).
S
stephanie60Aug 22, 2025
Why is there no sound coming from my Sega Arcade Game Machine?
- T
  Travis SotoAug 22, 2025
  If you're not getting any sound from your Sega Arcade Game Machine, try these steps: * First, make sure the volume isn't set too low. Adjust the sound volume control on the SWITCH UNIT. * If the volume is properly adjusted, there may be an issue with the BD and Amp. In this case, perform a SOUND TEST.
A
Ashley HodgeAug 25, 2025
What to do if communication play is not possible on my Sega Arcade Game Machines?
- L
  Lindsey MasonAug 25, 2025
  If you're having trouble with communication play on your Sega Arcade Game Machines, check the following: * Confirm that the communication cables are correctly connected. * Ensure that the communication settings are correctly configured.
C
Craig SullivanAug 26, 2025
Why does the Sega Arcade Game Machine Ride not advance when gripping the Throttle Lever?
- C
  crobinsonAug 26, 2025
  If the Ride on your Sega Arcade Game Machine isn't advancing when you use the Throttle Lever: * Check the Throttle Volume: Adjust the Volume values in the Test mode. * If adjusting the volume doesn't work, the Volume might be malfunctioning and need replacement.
G
gonzalezrobertAug 27, 2025
Why does the Ride on my Sega Arcade Game Machine not turn when the Handlebars are turned?
- J
  Justin BakerAug 27, 2025
  If the Ride on your Sega Arcade Game Machine isn't turning when you turn the Handlebars: * Check the Handle Volume: Adjust the Volume value in the test mode. * If adjusting the volume doesn't solve the problem, the Volume might be malfunctioning and need replacement.
M
Michael ThomasAug 29, 2025
What does 'NETWORK ERROR: DUPLICATE CABINET ID' mean on my Sega Arcade Game Machine?
- M
  Michelle ParksAug 29, 2025
  The 'NETWORK ERROR: DUPLICATE CABINET ID' message on your Sega Arcade Game Machine means that the Cabinet ID number is duplicated in Communication Mode. To fix this, change the Cabinet ID number for every seat in the Game Assignments.
T
trileyAug 31, 2025
What does 'NETWORK ERROR: TOO MANY NODES SITE' mean on my Sega Arcade Game Machine?
- V
  Vanessa MccormickAug 31, 2025
  The 'NETWORK ERROR: TOO MANY NODES SITE' message on your Sega Arcade Game Machine means that too many machines are connected. Only up to 4 machines can be connected for communication play.
R
rosarioemmaSep 2, 2025
What does 'NETWORK ERROR: DUPLICATE MASTER SITE' mean on my Sega Arcade Game Machine?
- C
  copelandsarahSep 2, 2025
  The 'NETWORK ERROR: DUPLICATE MASTER SITE' error on your Sega Arcade Game Machine indicates that the MASTER setting is duplicated in Communication Mode. You should perform the Communication Mode setting in the Game Assignments and set one machine to MASTER and all others to SLAVE.
R
robyncooperSep 4, 2025
What does 'NETWORK ERROR: NO SLAVE SITE' mean on my Sega Arcade Game Machine?
- A
  Anna BallSep 4, 2025
  The 'NETWORK ERROR: NO SLAVE SITE' error on your Sega Arcade Game Machine means that there is no SLAVE setting in Communication Mode. Perform the Communication Mode setting in the Game Assignments. Set one of the machines to MASTER and all others to SLAVE.
D
Debra WilsonSep 6, 2025
What does 'NETWORK ERROR: NO MASTER SITE' mean on my Sega Arcade Game Machine?
- P
  Pamela SmithSep 6, 2025
  The 'NETWORK ERROR: NO MASTER SITE' error on your Sega Arcade Game Machine indicates that there is no MASTER setting in Communication Mode. To resolve this, perform the Communication Mode setting in the Game Assignments, ensuring one machine is set to MASTER and all others to SLAVE.