www.seuservice.com
19
7. PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE
When moving the machine, be sure to pull out the plug from the power supply.
Moving the machine with the plug as is inserted can cause the power cord to be
damaged, resulting in a re and or electric shock.
When moving the machine on the oor, retract the Adjusters and ensure that Cast-
ers make contact with the oor. During transportation, pay careful attention so
that Casters do not tread power cords and earth wires. Damaging the power cords
can cause an electric shock and or short circuit.
In places where step-like grade differences exist, be sure to separate the Base, and
the Cabinet. Inclining the Base can cause the Cabinet to fall off from the Base and
result in injury.
When lifting the cabinet, be sure to hold the catch portions or bottom part. Lifting
the cabinet by holding other portions can damage parts and installation portions
due to the empty weight of the cabinet, and cause personal injury.
When moving the unit, do not push it from the rear side. Push it from sideways.
WARNING!
FIG. 8 a
Do not push the
cabinet from the
left/right direction.
* Note: Image differs from actual Unit.
To Next Page
Loading...
