Sega WaveRunner GP - Explanation of Test and Data Display

26
www.seuservice.com
www.seuservice.com
27
When the 2 or more machines are linked for communication play, be careful to enter the
TEST mode. If one of the machines linked enters the TEST mode, all others display the
NETWORK CHECK screen.
By operating the switch unit, periodically perform the tests and data check. When installing the ma-
chine initially or collecting cash, or when the machine does not function correctly, perform checking
in accordance with the explanations given in this section.
The following shows tests and modes that should be utilized as applicable.
NAOMI GAME BOARD is used for the product. The system of this game board allows another
game to be played by replacing the ROM Board Case mounted on the NAOMI CASE. As such, the
Test Mode of this system consists of the System Test Mode for the system to execute SELF-TEST,
COIN ASSIGNMENTS, etc. used in common for the machines employing the NAOMI BOARD, and
the Game Test Mode for the specic product to execute Input/Output test for the operation equipment,
difculty setting, etc.
9. EXPLANATION OF TEST AND DATA DISPLAY
STOP
IMPORTANT!