www.seuservice.com
53
14. GAME BOARD
Put the Game Board in the Carton Box (an accessory) together with the Shield Case
when requesting for the replacement or repair. Transporting the Game Board in an
undesignated status for replacement/repair is unacceptable.
In this manual, how to remove the Game Board is explained for convenience. How-
ever, this work should be performed by SEGA SERVICEMAN.
In order to prevent electric shock and short circuit hazards, be sure to turn power
off before performing work.
Be careful so as not to damage wirings. Damaged wiring can cause re, electric
shock and short circuit hazards.
Do not expose the Game BD, etc. without a good reason. Failure to observe this
can cause electric shock hazard or malfunctioning.
To perform work safely and securely, be sure to use 2 or more workers.
The electronic parts on the IC Board could be damaged due to human body's static
electricity. Before performing IC Board related work, be sure to discharge physically
accumulated statics by touching grounded metallic surfaces, etc.
WARNING!
STOP
IMPORTANT!
CAUTION!
To Next Page
Loading...
