Sega WaveRunner GP - User Manual

76 pages

Save Page as PDF

To Next Page

1ST PRINTING JUNE ‘03

MANUAL NO. 999-1869

Owner’s Manual

SEGA ENTERPRISES, INC. USA

STD Version

www.seuservice.com

Game Code: WRG

Questions and Answers

J
joeriddleSep 7, 2025
What to do if the fluorescent lamp doesn't light up on my Sega Arcade Game Machine?
- Y
  ylowerySep 8, 2025
  If the fluorescent lamp on your Sega Arcade Game Machine isn't lighting up: * Check the connector connections to the Marquee. * If the connections are good, the fluorescent lamp may need to be replaced.
S
stacey14Sep 9, 2025
What does 'DRIVE BD ERROR: E2H' mean on my Sega Arcade Game Machine?
- J
  johnwilsonSep 9, 2025
  The error 'DRIVE BD ERROR: E2H' on your Sega Arcade Game Machine indicates a bad connection to the Eliminator board. Check the connections from the Eliminator board to the Drive Board.
B
Brittany RoachSep 12, 2025
What does 'DRIVE BD ERROR: E3H' mean on my Sega Arcade Game Machine?
- B
  Brian ThomasSep 12, 2025
  The error 'DRIVE BD ERROR: E3H' on your Sega Arcade Game Machine suggests a bad connection to the Eliminator board. You should check the connections from the Eliminator board to the Drive Board.
E
Eric GloverSep 13, 2025
What does 'DRIVE BD ERROR: E4H' mean on my Sega Arcade Game Machine?
- D
  Dawn ArmstrongSep 13, 2025
  The error 'DRIVE BD ERROR: E4H' on your Sega Arcade Game Machine indicates a bad connection to the Eliminator board. Check the connections from the Eliminator board to the Drive Board.
A
Adam Williams PhDSep 15, 2025
What does 'DRIVE BD ERROR: E7H' mean on my Sega Arcade Game Machine?
- A
  Angela NunezSep 15, 2025
  The error 'DRIVE BD ERROR: E7H' on your Sega Arcade Game Machine indicates a bad connection to the Eliminator board. Check the connections from the Eliminator board to the Drive Board.
Z
zliSep 18, 2025
What does 'NO DRIVE BOARD' mean on my Sega Arcade Game Machine?
- A
  aprilleeSep 18, 2025
  The 'NO DRIVE BOARD' error on your Sega Arcade Game Machine indicates a bad connection to the Eliminator board. Check the connections from the Eliminator board to the Drive Board.