Sega OutRun2 - Page 25

17
www.seuservice.com
● Remove the 1 truss head screw that
fixes the GD-ROM drive lid (DISC
LID). And turn clockwise the lid to
remove.
TRUSS SCREW (1)
M3×8
PHOTO 6. 3 b
● Set the GD-ROM disc onto the GD-ROM drive with its labeled side facing upward.
● Return the lid to its original place, and fix it with 1 truss head screw. Be careful not to fasten the
screw too tightly.
TRUSS SCREW (1)
M3×8
PHOTO 6. 3 c