23
www.seuservice.com
7. PRECAUTIONS WHEN MOVING THE MACHINE
● When moving the machine, be sure to unplug the power plug. Moving the
machine with the plug as is inserted can damage the power cord and cause fire
and electric shock hazards.
● When moving the machine on the floor, retract the Adjusters and ensure
that Casters make contact with the floor. During transportation, pay careful
attention so that Casters do not tread power cords and earth wires. Damaging
the power cords can cause electric shock and short circuit hazards.
● Do not push the cabinet from the left/right when attempting to move the
unit. Pushing from the sides may cause the unit to tip and result in injury and
damage to parts.
Do not push on any parts made of glass (e.g. CRT screen) or plastic, as these parts
may break and result in bodily injury.
FIG. 8 a
Do not push the
cabinet from the
left/right direction.
WARNING!
CAUTION!
** Note: Image differs from actual product.
To Next Page
Loading...
