34
www.seuservice.com
9. Game Test Mode
[IMPORTANT]
When changing the game configuration, changes will not be enabled until the Game Test Mode has been
completed. Be sure to exit the Game Test Mode properly after configuration changes.
Select GAME TEST MODE from the System Menu screen to display the Game Test Menu screen as follows.
Use the SERVICE Button to move the cursor to the desired test item. Press the TEST Button to enter the selected
item.
NOTE: In Upright cabinet types, the DRIVE BOARD TEST is not necessary and the option will not be displayed.
<GAME TEST Menu screen>
After selecting an item, read the explanations below regarding operation.
After the test is complete, move the cursor to EXIT and press the TEST Button to return to the System Menu screen.
A. INPUT TEST
Select INPUT TEST to display the following screen and check the status of input devices.
This test should be used periodically to check that each input device is functioning correctly.
<INPUT TEST screen>
GAME TEST MODE
INPUT TEST
OUTPUT TEST
DRIVE BOARD TEST
GAME ASSIGNMENTS
BOOKKEEPING
BACKUP DATA CLEAR
--> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
GAME TEST MODE
STEERING 70H
GAS 22H
BRAKE 23H
GEAR POSITION N
START OFF
VIEW CHANGE OFF
SERVICE OFF
TEST OFF
PRESS TEST AND SERVICE BUTTON
TO EXIT
To Next Page
Loading...
Need help?
General
