24
www.sauservice.com
● When moving the unit short distances (ie. Room to Room) where the marquee
will not clear doorways or other openings, the marquee can be folded back
on its hinge by removing the rear support brackets and the 3 indicated screws
below
.
● When moving the unit from location to location such as via truck or other
machinery
, the marquee should be removed from the unit and NOT just
folded back on it’s hinge as this will cause damage to the unit. Do not attempt
to transport the unit with the marquee in the folded back position. This is only
for short distance travel and not for motor transport.
WARNING!
(3) screws to be removed to allow marquee fold back for short distance moving.
Remove
Remove