92
www.sauservice.com
16. GAME BOARD
● In order to prevent electric shock and short circuit hazards, be sure to turn power off
before performing work.
● Be careful not to damage the wires. Damaged wires may cause electric shock or short
circuit or present a fi
re risk.
● Do not expose the Game BD, etc. without a good reason. Failure to observe this can
cause electric shock hazard or malfunctioning.
● Do not use this product with connectors other than those that were connected and
used
with the Game Board at the time of shipping. Do not carelessly connect wires to
connectors that were not used at the time of shipping, as this may cause overheating,
smoke or fire damage.
● In this product, setting changes are made during the test mode. The Game BD need
not
be operated. Use the Game BD, etc. as is with the same setting made at the time of
shipment so as not to cause electric shock and malfunctioning.
● Static electricity from your body may damage some electronics devices on the IC
board.
Before handling the IC board, touch a grounded metallic surface so that the
static electricity can be discharged.
When having the game board replaced or repaired, use the included carton box to ship it.
Do not disassemble it. If the board is not received in the proper condition, it may not be
eligible for repair or replacement, or extra service char
ges may be applied.
The disassembly procedure for the game board is described in this manual for the
purpose of replacing the battery inside the board. Do not disassemble the board when
sending it in for replacement or repair
.
CAUTION!
STOP
IMPORTANT!
WARNING!
To Next Page
Loading...
Need help?
General
