1. Install the App, register, and log in.
2. Power on Segway eMoped C80 (see details on page 11). A flashing phone connection indicator means the vehicle is waiting for a connection.
3. Click ‘Search vehicle’ to connect to your Segway eloped C80. The Bluetooth signal will stop flashing when the connection is successful.
4. Follow the instructions to activate your vehicle and complete the New Rider Tutorial. The speed limit would now be lifted within the local legal bracket
and the Airlock could be activated via the app.
How to Charge
The battery level may be low or empty during transportation and storage. You can charge in any one of the methods below. Remember to unplug from the
power supply once fully charged.
1. Charge the Vehicle
Connect the battery power plug, then close the trunk. Connect the charger output to the vehicle charging port, and then connect to the power outlet.
2. Internal Charging
Connect the charger output to the battery charging port, plug it into the power outlet, and then close the trunk.
3. Charge the Battery
Open the trunk and take out the battery. Connect the charger output to the battery charging port, and then connect to the power outlet.
To Next Page
Loading...
Need help?
General