EasyManua.ls Logo

Segway Ninebot Gokart Pro - Remove the S-Max Body from the Gokart

Segway Ninebot Gokart Pro
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Remove the S-Max body form the Gokart
1. Rotate counter-clockwise to
unplug the power extension cord.
3. Remove the adaptor pad of S-Max.
2. Loosen the traps and take out


do not lift the backside more

bumper.


Do not lift the rear spoiler.
When the App is connected to the S-Max, this icon will glow steadily. When Bluetooth is enabled—
but not connected to a smart phone—this icon will blink.

Enable and adjust Speed Limit via the App. When the icon is illuminated, Speed Limit is on.
This speed limit can be adjusted in the App. As you approach the speed limit, the S-Max tilts back.
Speed Limit
Lock

Power Level
Enable Lock Mode via the App. The S-Max and App will vibrate and sound an alarm if anyone
moves it. The remote control will also alarm if it is powered on and within range (65 ft. [20
meters]) of the S-Max.
Turn ON/OFF.
The S-Max will automatically power OFF when idle for 10 minutes, or when laid down (horizontal) for over
30 seconds.
Indicates the remaining battery life. Each block equates to approximately 20% power level. When
the battery is nearly empty this icon blinks and the S-Max beeps, indicating that you need to
charge your S-Max. Your S-Max will gradually reduce the max speed limit as the power level
gradually decreases. Use the App to view the remaining power and estimated remaining range.

Lock

Speed Limit
Power Level
24 25

Table of Contents

Related product manuals