Version 2.0 Segway RMP – User Guide
20277-00001 aa 42
Replace Battery Packs in Pairs
Whenever you replace a Battery Pack, consider replacing both Battery Packs, and always use
pairs of Battery Packs with the same chemistry. Replacing only one Battery Pack will not
necessarily increase the performance or range of your Segway RMP, because the Segway RMP
is designed to operate only at the level allowed by the lower-energy Battery Pack. Redundancy is
a critical safety feature built into the Segway RMP. This applies to the Battery Packs. Therefore,
you should replace Battery Packs in pairs (except for the unusual situation where a Battery Pack
is replaced because of damage or defect and the other Battery Pack is relatively new).
To Next Page
Loading...