43
Beginner Button Functions
The following functions can be performed using the Beginner button.
Enabling and Disabling the Beginner Setting
1. To disable the Beginner Setting, confirm that the Beginner icon (turtle) is displayed, then tap the Beginner button. The Beginner icon
will no longer show in the Display.
2. To enable the Beginner Setting, confirm that the Beginner icon is not displayed, then tap the Beginner button. The Beginner icon will
show in the Display.
See "Unlocking and Locking the Beginner Setting" (p. 48) for more information.
The PT will only accept these commands when no Rider Detect Sensors are depressed (when there is no weight on the Mats).
Illuminating the Backlight
1. Press and hold the Beginner button to illuminate the Backlight.
2. Release the Beginner button to turn off the Backlight.
To Next Page
Loading...
