SEH ISD300 - Page 18

ISD300 User Manual
ISD300 User Manual
Network Settings
18
The Quick Setup involves four steps:
- general settings
- TCP/IP parameters
- the search for available printers in the network
- the setting up of queues
Proceed as follows:
1. Click Quick setup.
2. Enter the host name, date, and time.
3. Click Next to confirm.
4. Enter the TCP/IP parameter.
5. Click Next to confirm.
6. Enter a start and end IP address for the printer search. A
maximum of 255 IP addresses can be searched through at a
time.
7. Click Next to confirm.
You will get a message of the number of printers found in the
network.
8. Click OK to confirm.
A list of printers is displayed.
9. Enter a name for the queues in the column Queue name; see:
Queue Name Conventions on page 18.
10. Click Install.
The name of the queue appears dimmed in the column Queue
name.
11. Click Finish setup.
Table: Queue Name Conventions
Queue Name Conventions
- letters and numbers are allowed
- hyphens and underscores are allowed
- no space characters
- no more than 32 characters (Windows 98 max. 15 characters)