SEH ISD300 - Login Accounts

ISD300 User Manual
ISD300 User Manual
Security
50
3. Enter the PIN.
4. Click Set.
Entering the PIN
If a PIN has been set, the message ‘Enter PIN’ appears on the
display after a button is pressed.
To enter the PIN use the navigation keys on the ISD300. Use to
navigate to individual numerical values within the PIN. Change
individual numerical values via .
Carry out your action. When the action is complete, the operating
panel is again protected by the PIN.
Login Accounts
The simply access to the ISD300 Homepage is made by a user in
conjunction with a password. Username and password are
transferred unencrypted. For an encrypted connection (SSL)
certificates are needed; see: Certificates on page 52.
Access to the ISD300 Homepage is defined for three user groups:
’Any’, ’User’, and ’Admin’. See the table below for an overview of
the access rights for each group.
Table: Information - User groups
User group Access rights Default password
Any
- retrieving status information about
queues and print jobs
no password
necessary
User
- retrieving status information about
queues
- managing own print jobs, e.g.
deleting, halting print jobs,
changing hierarchy (depending on
the configuration by the
administrator)
user