SEH ISD300 - How to Store Drivers on the ISD300? (Windows XP;2000)

ISD300 User Manual
ISD300 User Manual
Managing Print Drivers
27
• The printer drivers that are required for printing will be installed
automatically on the connected clients; see: How to use ’Point
and Print’ with your PC client? on page 29.
How to store Drivers on the ISD300? (Windows XP/2000)
In heterogeneous networks, a separate printer driver has to be
stored on the ISD300 for each operating system. If there are, for
example, clients with the operating systems Windows XP and
Windows 98, you have to store the printer drivers on the ISD300 for
both operating systems.
Print drivers can be stored by printer administrators only. For further
information see: How to set a Printer Administrator Account? on
page 25.
Proceed as follows:
1. Click Run on the start menu to establish a connection to the
ISD300.
2. Enter the IP address of the ISD300.
Syntax: \\<IP address of the ISD300>
3. Click OK.
The connection will be established.
4. Click Printers (and Faxes).
The window Printers (and Faxes) appears.
5. Click Server Properties on the File menu.
The window Print Server Properties appears.
6. Select the Drivers tab.
7. Click Add.
The Printer Driver Wizard is started.
8. Follow the instructions of the Wizard.
9. If you use further operating systems, install the relevant printer
drivers.