Seiki se24fl - Remote Control

PREPARATION
Remote Control
1. (_): Switch the TV between on and
standby mode
2. t_:Mute and restore your TV sound
3. 0~9:Select a program(ATV/DTV mode)
4. m: Enter multiple program channel
number such as 2-1
5. 4.b: Return to previous viewing channel
6. P.MODE: Select picture mode: dynamic/
movie/energy saving/user/standard
7. S.MODE: Select sound mode: standard/
music/movie/user
8. MTS: Switch among different audio
channels:STEREO/MONO/SAP
9. SLEEP: Set the TV sleep timer:
OFF/5/10... 180/240min
10.SOURCE: Select among the different
input signal sources: TV/Component/AV/
HDMI /VGA/USB
11. INFO: Display the input source and
channel information
12. CH +/-: Select a channel
13. VOL+/-: Adjust the volume
14. C C: Closed Caption selection: ON/OFF/
CC On Mute
15. V-CHIP: Set up parental control
16. AUTO: Press to adjust the picture
automatically in VGA source
17. ASPECT: Select the aspect ratio
settings:standard/wide/wide zoom/zoom
18.4 A Y _: Allows you to navigate the
OSD menus and adjust the system
settings to your preference.
19. OK: Confirm the selection in the OSD
menus
20. MENU: Display the OSD (on screen
display)menu
21. EXIT: Exit the OSD menu
22. AIBIClD:Single push >switch to FAV channel
Push and hold >store current channel
23. CH.MST: Display program list
24. ADD/ERASE: Add or delete Favorite
channels
25. FAV+/FAV- : Press to scan the TV
favorite programs
26. FAV : Display the favorite channel list
27. HDMI: Select the HDMI mode directly