Seiko 7K52 - ADJUSTING THE HAND POSITION BEFORE DIVING

English
10
ADJUSTING THE HAND POSITION BEFORE DIVING
B
Press repeatedly until you hear a long beep.
B
C
DEPTH hand
1/10 m hand
MAX. DEPTH hand
DIVING
TIME
hand
CROWN
Set the current time. (See “TIME/CALEN-
DAR SETTING)
▼
Push in in accordance with a time signal,
and screw in completely.
▼
▼
C
Press to reset the 1/10 m, DEPTH and
MAX. DEPTH hands to “0” position.
B
Press to reset the DIVING TIME hand to
“0” position.
CROWN
Unscrew, and pull out to second click when
small second hand is at the “0” position.
▼
● If any of the hands does not return to “0” position, follow the procedure below.
● With each press of button B, the indication of the diving hands changes as follows:
Log data of
the last dive
Log data of the
dive before last
(Beep, beep)
(Beep)
(A long beep)
Diving hands at
“0” position