Seiko 7K52 - SINGLE-TIME ALARM; ALARM TIME SETTING

English
19
SINGLE-TIME ALARM
● To stop the alarm manually:
Press any of the buttons.
● To cancel the alarm:
Press button B to recall the log data, or press
and hold button A until the small hands indicate
the current time.
● The alarm can be set to ring once within the coming 12 hours.
● While on the surface, the small hands at the 6 o’clock position serve as alarm hands.
* While you are at a depth of 1.6 m or more underwater and for 10 minutes after a dive, the single-time
alarm function cannot be used.
ALARM TIME SETTING
Press to reset the hands for diving
measurement to “0” position.
B
▼
A
Set the alarm time.
*At the designated time, the alarm rings for 20
seconds and is automatically disengaged.
A
B
Small hour and minute hands
Ex.: Alarm time is set at “10:30”.