English
22
NOTES ON OPERATING THE WATCH
*1-*5 Remarks on time/calendar function:
*1 • The day of the week is automatically set once the year, month and date are set.
• When the time is set in the 24-hour display, the alarm time will also be shown in the
24-hour display.
*2 • The digits,other than seconds and “12H”/“24H”, advance quickly if Button D is kept
pressed.
• When the seconds read any number between “30” and “59” and Button D is
pressed, one minute is added.
• When setting the hours in the 12-hour display, check that AM/PM is properly set. A
PM indicator (“P” mark) from the afternoon is shown when the 12-hour display is
selected. In the 24-hour display, there is no such indicator.
*3 • The hands move clockwise by pressing Button D. They move quickly if the button is
kept pressed.
• The hands keep advancing if Button D is released. Press Button D again to stop
them.
• After the digital and analogue times are set, if you want to correct digital time to adjust
second digits only, it is not necessary to adjust analogue time again
*4 If the watch is left untouched in the TIME/CALENDAR SETTING display with an item
flashing, it will automatically return to the TIME/CALENDAR mode in 2 to 3 minutes.
*5 The hourly time signal will not ring while alarm is sounding.
To Next Page
Loading...
