Seiko TP-20 - Setting the Radio-Controlled Clock; Compulsive Radio Reception

40
41
1 Press the [SELECT] button and position
the " " over the "SLAVE CLOCK/DCF"
mark. At that moment, the flashing digit
indicates "Clock Options".
(The flashing means it can be changed.)
2
After you finish setting the radio clock,
press the [SET] button once again.
Now the radio clock setting has been
completed. Replace the cover and lock.
Important: If you do not complete
Step 2, the Time Stamp will not print
and start reception.
Set the "Clock Options".
In case of the example, press the
[CHANGE] button to set at "2".
And then press the [SET] button.
Compulsive reception of radio
SELECT CHANGE SET
SLAVE CLOCK/DCF
Clock Options
SELECT CHANGE SET
SLAVE CLOCK/DCF
MO TU WE TH FR SASU
Setting the Radio-Controlled Clock
This function operates by receiving DCF77 radio wave transmitted in Germany.
Example: Set the DCF (Radio-Controlled clock).
1 Press the [SELECT] button and position
the " " over the "SLAVE CLOCK/DCF"
mark. At that moment, the flashing digit
indicates "Clock Options".
Press the [SET] button once again, then
the Time Stamp will start compulsive
reception. Replace the cover and lock.
Important:
If you do not complete
Step 2, the Time Stamp will not print
and start compulsive reception.
2
Press the [SET] button because the
"Clock Option" is not to be changed.
SELECT CHANGE SET
SLAVE CLOCK/DCF
Clock Options
SELECT CHANGE SET
SLAVE CLOCK/DCF
MO TU WE TH FR SASU
Reception
indication
Reception
indication