Seko KRONOS 20 pH/ORP - Manual Dosing and Operation Display; Setting the Language; Manual Dosing Operation; Display During Operation

0000138014 rev. 1.0 EN
3
Setting the language
Programming
Operation
Allows you to set the language. By default the pump is set to English.
Press to access the item, and then press to set the language.
Press to confirm and return to the main menu.
Paragraph 1 – Manual dosing
Programming
Operation
The pump operates in constant mode. The trigger for the consent is
connected to the Start-Stop input. You can also program:
- Time ON, the operating time of the pump.
- Time OFF, the functional stop of the pump.
Time ON and Time OFF alternate with each other.
Display during operation
–––
Function mode
• Man = Manual
Alarms and statuses
• Lev = Level Alarm
• Flw = Flow Alarm
Value of dosing on going
(depends on unit of measure
selected)
• Percentage, Frequency,
l/h, Gph, ml/m
MAN
P 100%
Pump status
• empty = pump in stating
• Stop = pump in stop
• Paus = pump in pause
PROG
Config.
Config.
Funct.
Delay ON
Off
CALDelay
Off
Language
English
PROG
Config.
Config.
Funct.
Funct.
Manual