Seko KRONOS 50 - Manual and mA Dosing Modes

0000137630 Rev. 2.0 8
!
Paragraph 5
These items menu are different depending on the
!!!!!!!!!!!!!! !menu
settings:
• Manual Mode
• mA Mode
• PPM Mode
• 1:N Mode
• N:1 Mode
• Batch Mode
Case Manual Mode:
Pump doses at selected flow rate. If OFF Time is set to 0sec, pump runs continuously.
Pump start dosing after a selectable Delay time.
Ex. Manual Dosing with trigger:
!
!
If no trigger is selected, pump start delay counting after power-on.
Programming
Operation
!
!
!
!
!
The pump operates in constant mode. The flow can only be
manually regulated by pressing the
keys at the
same time to increase the flow, or the
keys to
decrease it.
Makes it possible to set:
• ON Time= Time for which the pump runs.
• OFF Time= Time for which the pump is stopped.
• DELAY Time= time delay after which the pump
starts to run.
PROG!
Configuration!
Pump function!
Manual Mode!
Manual MODE!
ON Time sec!
Manual MODE!
OFF Time sec!
!
Manual MODE!
DELAY Time sec!
!
Delay
ON
OFF
Trigger
Dosing