Need help?Do you have a question about the Seko KEMIDOSE DOUBLE and is the answer not in the manual?
General| Model | KEMIDOSE DOUBLE |
|---|---|
| Manufacturer | SEKO |
| Diaphragm Material | PTFE |
| Power Supply | 230V AC, 50/60Hz |
| Pump Head Material | PVDF |
| Control | Manual |
| Enclosure | IP65 |
Instructions on how to position probes for optimal reading.
Precautions for pH systems when used with a salt chlorinator.
Guide to navigating and confirming settings via button presses.
Option to select the display language from available options.
Configuration for pH setpoint, type, temperature, and alarm band.
Configuration for ORP setpoint, type, and alarm band.
Configuration for Chlorine setpoint, type, and alarm band.
Access to advanced settings like circulation pump and calibration.
Configuring dosing methods and maximum pump flow rate.
Settings for auxiliary relays and system password.
Options for resetting calibration, parameters, and viewing signals.
Viewing current parameters and accessing the calibration menu.
Procedure for setting a reference pH value during calibration.
Procedure for setting a reference ORP value during calibration.
Procedure for setting a reference temperature value during calibration.
Procedure to adjust set point values and confirm them.
How to put the system into standby mode, disabling all functions.
Resetting the OFA timer and priming the pumps for various functions.
Steps to reset the unit to its factory default settings.
List of factory default settings for language, set points, and modes.
Information on downloading and using the SekoLink smartphone app.
Instructions for logging into internal webpages using a QR code.
Steps to set up WiFi LAN name and password for the device.
Completing the device registration process.
Details on using the SekoLink app for pool management.
Information on using the SekoWeb portal for professional pool management.
Describes level alarms and actions to restore product tank.
Details out of range alarms and actions to restore measures.
Information on OFA first alarm timing and reset procedures.
Information on OFA second alarm timing and reset procedures.
Actions to take for flow rate related alarms.
Procedure for handling errors during calibration functions.
Handling system parameter errors and measure range alarms.
Summary of connection points and their labels.
Detailed specifications for wiring probes and system components.
To Next Page
