Seko KRONOS 50 - Emergency Procedures; About This Product; Product Overview and Applications; Key Features

0000137630 Rev. 2.0 2
!
Information in the event of an emergency
Remove the mains plug or press one of the emergency stop buttons, if
fitted, in the event of an emergency.
If feed chemical escapes, also depressurize the hydraulic system around the pump. Observe the safety data sheet
for the feed chimical.
2. ABOUT THIS PRODUCT
The Kronos is a peristaltic metering pump drive by a stepper motor. The feed chemical is conveyed by means
of the rotor squeezing on the hose. No valves are needed for this. This ensures gentle handling of the metered
media.
Typical applications are in processes where only a low discharge pressure is required, such as in the metering
of chemicals into galvanic baths, in clarification tanks or for metering conditioning agents into swimming pools
(flocculants, activated carbon and chemicals).
The housing is made from shock-proof and chemical resistant PPE with IP65 protection degree.
It is equipped with several inputs for metering configuration. The stepper motor means that metering is infinitely
adjustable.
The following provides an overview of the most important features:
• Power supply 100÷240 Vac 50/60 Hz
• Output range 0.010 ÷ 10.00 l/h @ 2bar or 0.002 ÷ 02.00 l/h @ 3bar
• Hose material SekoExtra or SekoMed (other on request)
• Powerful stepper motor, speed configurable
• Infinite adjustment of the metering output either manually or externally via 0/4-20 mA signals
• Priming function (high-speed run)
• Display of metering output on display in l/h, ml/m, Gph or %
• Reversible direction
• Housing protection class IP 65
• Tube breaking system
• Fuse 1,6A (20W)
!
!
!
!
!
!
!
!