C-500/C-500R
4
⑥ Shutter Speed Display
※(Displayed)Auto-Reset Cordless Flash Mode or Cord Flash Mode
“S” Appears when shutter speed is in full seconds
Example: 1s is displayed for shutter speed 1 second. 60 is displayed for shutter speed
1 / 60 seconds.
⑦ Preset Color / White Balance Display and Contrast Icons
(Displayed) Selected Preset Function (Selected Preset No. 1~19)
(Displayed) Used Monitoring facility
⑧ Dot Matrix Display for Preset Name, Menu and Illuminance
A menu name is displayed during menu selection.
A Preset name is displayed at the time of a Preset setup.
The unit of illumination is displayed only when Ix or FC is set up with the Illumi. Sub menu of a
custom-made setup.
⑨ LB, Measured Color Temperature and Illuminance Display
LB index, LB filter, and a color temperature are displayed by display mode.
A simple illumination display is displayed only when Ix or FC is set up with the Illumi. Sub menu of
the custom-made setup.
In the error besides the display range and the measurement range, u, Under or o, and Over are
displayed.
u, Under Appears when below display range
“u, Under” Blinks when under measured below measurement range
o, Over Appears when above display range
“o, Over” Blinks when over measured above measurement range
⑩ CC Display
CC index and CC filter are displayed by display mode.
⑪ Radio triggering channel and Quad-triggering Zone Display
(Displayed) Wireless Flash Radio Triggering Mode
The main channel which chose 1~16 channels is displayed.
The main channel (17~32) which chose 17~32 channels, and a sub-channel (A~D) are displayed.
Auto Electro-Luminescent Display (EL)
In low light (160lx or less), a green backlight will automatically illuminate the entire LCD.
The LCD will not be automatically illuminated during measuring, in Cordless Flash mode or
Wireless flash radio triggering mode.
The Electro-luminescent backlight will automatically turn off 20 seconds after last operation.
To Next Page
Loading...
