3) The Custom setting item will change each time the MODE Button
③
is
pressed.
Use these settings to customize meter operations and displays to fit
your camera and metering requirements.
Custom setting group Custom setting item
Display mode
Increments of aperture
and shutter speed
Simplified illuminance
display
1/2 Step
No Display
Lux
CINE modeHD_CINE mode
Full Step 1/3 Step
(※1)
PHOTO mode
(※1)
ＣＳ１
ＣＳ２
ＣＳ３
(※2)
CS number
Foot-Candle
(※1)
※1
Default settings.
※2
Simplified illuminance (Lux or Foot-Candle) is not displayed in PHOTO mode.
fc
4) Press POWER Button
①
to exit Custom setting mode.
9. Calibration Compensation Function
Compensation may be necessary to calibrate the meter to camera
specications or to match the display to another exposure meter.
Calibration compensation can be made in precise 1/10 step
increments in a +/-1.0 EV range.
1) Set the camera Display mode (HD CINE, CINE or PHOTO) in advance.
2) To enter the calibration compensation mode, hold the ISO Button
⑦
and
press the POWER Button
①
to turn the meter ON
.
3) Select the compensation amount by pressing the UP Button
⑤
or
DOWN Button
⑥
.
※
Plus compensation results
in the increased exposure
(the image becomes
brighter), and minus
compensation results in the
decreased exposure (the
image becomes darker).
4) Press POWER Button
①
to exit
Calibration compensation mode.
Calibration
compensation mode
Selected
Display mode
Compensation
amount
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Previous Page
Loading...
