Setting ISO sensitivity
Hold down the ISO Button
⑦
and press either the UP Button
⑤
or DOWN
Button
⑥
to select ISO sensitivity being used.
6. Display Mode
Select PHOTO Mode, HD CINE Mode or CINE Mode.
Please see "8.Custom setting function" below for how to select.
7. Select Measuring Mode
Press the MODE Button
③
to select the Measuring mode.
HD_CINE Mode
Cord Flash mode (shutter speed priority)
PHOTO Mode
EV mode (Ambient mode)Aperture Priority Mode
Shutter speed priority mode
Auto Reset Cordless Flash mode (shutter speed priority)
Simplified illuminance mode(Selectable in Custom setting)
Frame rate setting mode
Shutter angle setting mode
CINE Mode
Shutter speed priority mode
Frame rate priority mode
Simplified illuminance mode (Selectable in Custom setting)
Hold ISO Button
⑥
and press MODE Button
③
to return to the previous
Measuring Mode.
8. Custom Setting Function
1) To enter the Custom Setting Mode, hold the MODE Button
③
and then
press the POWER Button
①
to turn the meter ON.
‘CS’ (custom setting) and setting number (1
to 3) will appear at the right of the display.
The current custom setting will appear at
the left side of the display.
2) Press the UP
Button
⑤
or DOWN
Button
⑥
to select the desired custom
setting group number.
Custom Setting item
CS No./Group
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
