Sekonic SPEEDMASTER L-858D-U - Names and Functions of Parts

<Flash Mode>
No. Description of mode
7
Cordless ash mode
Detects ash brightness without meter-ash connection after
Measuring button pressed to arm meter for 90 seconds and ash
red separately, and displays F-stop value.
8
Cordless multiple (cumulative) ash mode
Detects and accumulates ash brightness without meter-ash
connection after Measuring button pressed to arm meter for 90
seconds and ash red separately, and displays F-stop value.
9
Cord ash mode
Detects ash brightness with synchro cord meter-ash connection,
and displays F-stop value.
0
Cord multiple (cumulative) ash mode
Detects and accumulates ash brightness with synchro cord meter-
ash connection, and displays F-stop value.
a
Radio triggering ash mode
Detects ash brightness after Measuring button is pressed to send
radio transmitted signal to radio receiver connected to ash. Displays
F-stop value (When a transmitter sold separately is installed).
b
Radio triggering multiple (cumulative) ash mode
Detects and accumulates ash brightness after Measuring button is
pressed to send radio transmitted signal to radio receiver connected
to ash. Displays F-stop value (When a transmitter sold separately
is installed).
7
[Cordless Flash Mode
Measuring screen]
[Measuring Mode
Selection screen]
Settings
Percentage
of ash
Measured
values
(F-stop values)
Ambient light
(Orange)
For Flash
analyzing
display
Flash light
(Blue)
7
8
9
0
a
b
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com